Auto Racing Harness Mount Bars

OurPrice: $320.00

Brey-Krause R-1010 harness guide bar properly locates and supports the racing shoulder harnesses relative to the driver. The Brey-Krause R-1010 harness guide bar also prevents excessive shifting and driver fatigue during the high G-loads of cornering and braking. No drilling or modifications to the car are required for installation. The R-1010 harness guide bar attaches to factory mounting points in "B" pillars. Bar is designed to allow enough seat travel for tall drivers.
...

OurPrice: $420.00

The Brey-Krause R-1015 harness guide bar is made of Type 304, stainless steel with a satin finish. The Brey-Krause R-1015 harness guide bar attaches to factory mounting points in "B" pillars. The support rods attach to lap belt mounting points. Th R-1015 harness guide bar is designed to allow enough seat travel for tall drivers.
...

OurPrice: $425.00

Brey-Krause R-1020 harness guide bar properly locates and supports racing shoulder harnesses relative to the driver. The Brey-Krause R-1020 harness guide bar also prevents excessive shifting and driver fatigue during the high G-loads of cornering and braking. No drilling or modifications to the car are required for installation. Bar attaches to factory mounting points in "B" pillars and shoulder straps. The Bre-Krause R-1020 harness guide bar is designed to allow enough seat travel for tall drivers.
...

OurPrice: $610.00

The Brey-Krause R-1025 harness truss has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. It's strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The Brey-Krause R-1025 harness truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type...

OurPrice: $670.00

The Brey-Krause R-1029 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Porshe 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The Brey-Krause R-1029 harness mount bars also prevent...

OurPrice: $670.00

The Brey-Krause R-1030 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Porshe 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The Brey-Krause R-1030 harness mount bar also...

OurPrice: $180.00

The Brey-Krause R-1031 harness mount bar adaptor adapts the R-1030 and R-1035 harness mounts to fit in the 996 GT2 and GT3. It features new strut tubes that are designed to go to the forward lap belt mounts, as these cars lack rear seat belt mounting points. This kit replaces the forward support tubes included in original kit. Alternate bracket available for certain power seats upon request. The Brey-Krause R-1031 harness mount bar adaptor bolts to your...

OurPrice: $960.00

The Brey-Krause R-1035 aluminum harness mount truss features water-jet machined aluminum construction. Like all Brey-Krause harness mounts, the R-1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats. The Brey-Krause R-1035 aluminum harness mount truss attaches to rear strut tops & seat belt mounting points and is easy to remove/reinstall. NOTE-For the 996/997 GT2 & GT3, the...

OurPrice: $700.00

Brey-Krause R-1045 Cayman harness truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The Brey-Krause R-1045 harness mount truss is made of aluminum and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 harness mount truss is easy to install and remove, utilizing existing factory mounting points. The lattice is...

OurPrice: $610.00

The Brey-Krause R-1110 harness mount bars allow drivers to attach their harnesses directly to the bar. The Brey-Krause harness mount bar properly locates and supports racing shoulder harnesses relative to the driver and do not use or interfere with factory shoulder harness installation. Fabricated from type 304 stainless steel and is available in satin finish stainless. The Brey-Krause R-1110 harness mount bar attaches to factory mounting points in "B" pillars. Support rods attach to outside lap belt...

OurPrice: $475.00

The Brey-Krause R-1115 harness mount bars allow drivers to attach their harnesses directly to the bar. The Brey-Krause R-1115 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver and do not use or interfere with factory shoulder harness installation. The R-1115 harness mount bar is fabricated from type 304 stainless steel and is available in a durable black wrinkle-finish, powdercoated finish.
(Lap belt mount kit sold seperately: R-9115)...

OurPrice: $775.00

The Brey-Krause R-1120 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Brey-Krause R-1120 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting...

OurPrice: $115.00

Brey Krause Sub-Belt Mount Bar fits Porsche 996/997, Boxster and Cayman.
The Brey Krause Sub-Belt Mount Bar for Porsche is 1.5" X 1" X .125" Wall Carbon Steel Tubing and is
Powdercoated in durable black wrinkle-finish.
The Brey Krause Sub-Belt Mount Bar for Porsche attaches to R-907X series side mounts.
This mount works with the R-907X series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional R-2030 Fire Extinguisher Mount and AMEREX 2 1/2...

OurPrice: $115.00

The Brey-Krause R-9032 Sub Strap Mount Bar is made of stainless steel tubing and is powder coated in a durable black wrinkle-finish. The Brey-Krause R-9032 Sub Strap Mount Bar weighs in at 3 lbs. and attaches to driver side seat assembly using factory mounting points. This mount bar is used with Brey-Krause's R-2032 fire extinguisher mount. The Brey-Krause R-9032 Sub Strap Mount Bar fits Porsche 997/987 Optional Sport Bucket Seats (driver side) and GT2/GT3 seats (driver side)....

OurPrice: $115.00

The Brey-Krause R-9034 Sub Strap Mount Bar is made of stainless steel tubing and is powder coated in a durable black wrinkle-finish. The Brey-Krause R-9034 Sub Strap Mount Bar weighs in at 3 lbs. and attaches to passenger side seat assembly using factory mounting points. The Brey-Krause R-9034 Sub Strap Mount Bar fits Porsche 997/987 Optional Sport Bucket Seats (passenger side) and GT2/GT3 seats (passenger side)....

OurPrice: $50.00

The Brey-Krause R-9130 Sub Strap Mount Bar for Corvette C4 is fabricated from steel and is available in a durable black wrinkle-finish powdercoated finish. This Sub Strap Mount bar is the proper way to properly mount Sub Belts in your C4 Corvette....

OurPrice: $299.00

Corbeau Mustang Harness Bars are manufactured with the highest-grade materials and come in a silver powder coated finish. The Corbeau Mustang Harness Bar also comes with reinforcement tubes on each side of the vehicle, which mount to the base of your B pillar and then connect to your Harness Bar. These tubes create extra reinforcement, which will eliminate vertical movement and keep the Harness Bar level at all times. The Corbeau Mustang Harness Bar will also allow you to retain...

OurPrice: $99.95

Porsche Sub-Belt Mount Bar allows proper mounting of the submarmine belt. This bar is designed for use only with fiberglasss shell style seats. The Porsche Sub-Belt Mount Bar was designed by Porsche for the GT3 Cup and GT3 R and RS model factory race cars. Works very well with the Recaro GT3 seat. This bar is not designed to work on any traditional Sport Seats.
...