Auto Racing Harnesses - Mounts - Restraints

OurPrice: $315.00

Brey-Krause R-1010 harness guide bar properly locates and supports the racing shoulder harnesses relative to the driver. The Brey-Krause R-1010 harness guide bar also prevents excessive shifting and driver fatigue during the high G-loads of cornering and braking. No drilling or modifications to the car are required for installation. The R-1010 harness guide bar attaches to factory mounting points in "B" pillars. Bar is designed to allow enough seat travel for tall drivers.
...
Learn More About The Brey-Krause R-1010 Harness Guide Bar - Porsche 911 (coupe) all 1974-1998

OurPrice: $418.00

The Brey-Krause R-1015 harness guide bar is made of Type 304, stainless steel with a satin finish. The Brey-Krause R-1015 harness guide bar attaches to factory mounting points in "B" pillars. The support rods attach to lap belt mounting points. Th R-1015 harness guide bar is designed to allow enough seat travel for tall drivers.
...
Learn More About The Brey-Krause R-1015 Harness Guide Bar - 911(Targa) '74 - '93

OurPrice: $424.00

Brey-Krause R-1020 harness guide bar properly locates and supports racing shoulder harnesses relative to the driver. The Brey-Krause R-1020 harness guide bar also prevents excessive shifting and driver fatigue during the high G-loads of cornering and braking. No drilling or modifications to the car are required for installation. Bar attaches to factory mounting points in "B" pillars and shoulder straps. The Bre-Krause R-1020 harness guide bar is designed to allow enough seat travel for tall drivers.
...
Learn More About The Brey-Krause R-1020 Harness Guide Bar - Porsche 924,944,968

OurPrice: $606.00

The Brey-Krause R-1025 harness truss has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. It's strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The Brey-Krause R-1025 harness truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type...
Learn More About The Brey-Krause R-1025 Harness Truss - Porsche 911 (coupe) 1974-1998

OurPrice: $667.00

The Brey-Krause R-1029 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Porshe 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The Brey-Krause R-1029 harness mount bars also prevent...
Learn More About The Brey-Krause R-1029 Harness Mount Bar - 996 Cabriolet & 997 Cabriolet/Coupe (with Bose Speakers)

OurPrice: $667.00

The Brey-Krause R-1030 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Porshe 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The Brey-Krause R-1030 harness mount bar also...
Learn More About The Brey-Krause R-1030 Harness Mount Bar - Porsche 996 & 997 Coupe (without Bose Speakers)

OurPrice: $178.00

The Brey-Krause R-1031 harness mount bar adaptor adapts the R-1030 and R-1035 harness mounts to fit in the 996 GT2 and GT3. It features new strut tubes that are designed to go to the forward lap belt mounts, as these cars lack rear seat belt mounting points. This kit replaces the forward support tubes included in original kit. Alternate bracket available for certain power seats upon request. The Brey-Krause R-1031 harness mount bar adaptor bolts to your...
Learn More About The Brey-Krause R-1031 Harness Mount Bar Adaptor - 996 GT2/GT3 & 997 GT2/GT3

OurPrice: $957.00

The Brey-Krause R-1035 aluminum harness mount truss features water-jet machined aluminum construction. Like all Brey-Krause harness mounts, the R-1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats. The Brey-Krause R-1035 aluminum harness mount truss attaches to rear strut tops & seat belt mounting points and is easy to remove/reinstall. NOTE-For the 996/997 GT2 & GT3, the...
Learn More About The Brey-Krause R-1035 Aluminum Harness Mount Truss - 996 & 997 Coupe (without Bose Speakers)

OurPrice: $699.95

Brey-Krause R-1045 Cayman harness truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The Brey-Krause R-1045 harness mount truss is made of aluminum and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 harness mount truss is easy to install and remove, utilizing existing factory mounting points. The lattice is...
Learn More About The Brey-Krause R-1045 Harness Mount Truss - Porsche Cayman Coupe '06-present

OurPrice: $606.00

The Brey-Krause R-1110 harness mount bars allow drivers to attach their harnesses directly to the bar. The Brey-Krause harness mount bar properly locates and supports racing shoulder harnesses relative to the driver and do not use or interfere with factory shoulder harness installation. Fabricated from type 304 stainless steel and is available in satin finish stainless. The Brey-Krause R-1110 harness mount bar attaches to factory mounting points in "B" pillars. Support rods attach to outside lap belt...
Learn More About The Brey-Krause R-1110 Harness Mount Bar for Corvette C4 (with outside belt mount kit)

OurPrice: $473.00

The Brey-Krause R-1115 harness mount bars allow drivers to attach their harnesses directly to the bar. The Brey-Krause R-1115 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver and do not use or interfere with factory shoulder harness installation. The R-1115 harness mount bar is fabricated from type 304 stainless steel and is available in a durable black wrinkle-finish, powdercoated finish.
(Lap belt mount kit sold seperately: R-9115)...
Learn More About The Brey-Krause R-1115 Harness Mount Bar for Corvette C5

OurPrice: $772.00

The Brey-Krause R-1120 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Brey-Krause R-1120 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting...
Learn More About The Brey-Krause R-1120 Harness Mount Bar for C6 Corvette

OurPrice: $79.00

The Brey-Krause R-9001 Tunnel Side Seatbelt Mount Kit for Porsche 996, Boxster, 944 bolts to existing seatbelt mount amd provides a mounting point for snap-on 3" lap belts. Sold in pairs. Kit is for 2 seats. (For 1985-1989 Also Order R-9002 Kit ) ...
Learn More About The Brey-Krause R-9001 Tunnel Side Seatbelt Mount Kit for Porsche 996, Boxster, 944

OurPrice: $14.00

The Brey-Krause R-9002 Tunnel Side Seat Belt Hardware Kit is for use with Brey-Krause Part R-9001 in 1985-89 models ( Porsche 996, Boxster, 911, 944)...
Learn More About The Brey-Krause R-9002 Tunnel Side Seat Belt Hardware Kit

OurPrice: $79.00

The Brey-Krause R-9003 Outside Seat Belt Mount fits Porsche 996, Boxster, 911, 944 (For 1990 and newer models). Sold in pairs - One package will do 2 seats....
Learn More About The Brey-Krause R-9003 Outside Seat Belt Mount

OurPrice: $79.00

The Brey-Krause R-9004 Extra Short Tunnel Side Seat Belt Mount Kit fits Porsche 996, Boxster, 911 and 944.
These brackets were intended for seat applications where the standard Brey-Krause tunnel side lap belt mount (R-9001) is too long.
The Brey-Krause R-9004 Extra Short Tunnel Side Seat Belt Mount Kit secures snap-in lap belts to factory tunnel side (inside) seat belt mounting points.
Recommended for extra-low seating applications where the R-9001 sits excessively high.
One pair will work for both seats.
...
Learn More About The Brey-Krause R-9004 Extra Short Tunnel Side Seat Belt Mount Kit

OurPrice: $107.00

Brey Krause Sub-Belt Mount Bar fits Porsche 996/997, Boxster and Cayman.
The Brey Krause Sub-Belt Mount Bar for Porsche is 1.5" X 1" X .125" Wall Carbon Steel Tubing and is
Powdercoated in durable black wrinkle-finish.
The Brey Krause Sub-Belt Mount Bar for Porsche attaches to R-907X series side mounts.
This mount works with the R-907X series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional R-2030 Fire Extinguisher Mount and AMEREX 2 1/2...
Learn More About The Brey-Krause R-9030 Sub-Belt Mount Bar for Porsche

OurPrice: $61.00

Brey-Krause R-9110 Inside Belt Mount Kit for Corvette C4 -sold in pairs. One pair required for 2 seats....
Learn More About The Brey-Krause R-9110 Inside Belt Mount Kit for Corvette C4

OurPrice: $158.00

Brey-Krause R-9115 Lap Belt Mount Kit for Corvette C5.
Installation: Secure snap-in belts to factory seat belt mounting points. One kit required per vehicle. One kit works for both passenger and driver seats in C5.
The Brey-Krause R-9115 Lap Belt Mount Kit for Corvette C5 will not disable use of factory seat belts.
Material: Type 304, stainless steel.
Finish: Satin finish stainless steel.
Weight: 4 lbs.

...
Learn More About The Brey-Krause R-9115 Lap Belt Mount Kit for Corvette C5

OurPrice: $143.00

The Brey-Krause R-9120 Lap Belt Mount Kit fits Corvette C6 models, '05+ C6 Coupes and '06+ Z06 Coupes.
One lap belt kit is required per vehicle. One lap kit works for both passenger and driver seats in C6. The Brey-Krause R-9120 lap belt mount kit will not disable use of factory belts. The lap belt mount kit secures snap-in belts to factory seat belt mounting points. The Brey-Krause R-9120 lap belt mount kit is made of Type 304 Stainless...
Learn More About The Brey-Krause R-9120 Lap Belt Mount Kit - Corvette C6

OurPrice: $48.00

The Brey-Krause R-9130 Sub Strap Mount Bar for Corvette C4 is fabricated from steel and is available in a durable black wrinkle-finish powdercoated finish. This Sub Strap Mount bar is the proper way to properly mount Sub Belts in your C4 Corvette....
Learn More About The Brey-Krause R-9130 Sub Strap Mount Bar for Corvette C4

OurPrice: $299.00

Corbeau Mustang Harness Bars are manufactured with the highest-grade materials and come in a silver powder coated finish. The Corbeau Mustang Harness Bar also comes with reinforcement tubes on each side of the vehicle, which mount to the base of your B pillar and then connect to your Harness Bar. These tubes create extra reinforcement, which will eliminate vertical movement and keep the Harness Bar level at all times. The Corbeau Mustang Harness Bar will also allow you to retain...
Learn More About The Corbeau Mustang Harness Bar

List Price: $24.99
OurPrice: $19.99

G-Force 3" Harness Pads are covered in a flame-retardant fabric with a velcro closure for easy adjustment or removal. A high density flame-retardant foam provides effective padding. Available in Red, Blue and Black....
Learn More About The G-Force 3" Harness Pads

List Price: $79.99
OurPrice: $69.99
(Selected options may carry additional charges)

The G-Force 5 Pt. Latch & Link Racing Harness set uses soft weave Polyteck webbing. This Racing Harness set includes 3" individual shoulders, pull-down lap belt and single-sub. The G-Force 5 Pt. Latch & Link
Racing Harness Set belts come standard with bolt-in ends and are SFI 16.1 Rated. Adjustment lengths - Shoulder: 26"-50"; Pull-Down Lap: 38"-67";Sub-strap: 7"-25". The G-Force 5 Pt. Latch & Link Racing Harness set is available in Black, Red...
Learn More About The G-Force 5 Pt. Latch & Link Racing Harness Set w/ Individual Shoulders

List Price: $84.99
OurPrice: $74.99
(Selected options may carry additional charges)

G-Force 6 Pt. Latch & Link Racing Harness Set w/ Individual Shoulders uses soft weave Polyteck webbing. This Racing Harness set includes 3" individual shoulders, pull-down lap belt and dual-sub. The belts in the G-Force 6 Pt. Latch & Link Racing Harness Set come standard with bolt-in ends and are SFI 16.1 Rated. Adjustment lengths - Shoulder: 26"-50"; Pull-Down Lap: 38"-67";Sub-strap: 7"-25". G-Force 6 Pt. Latch & Link Racing Harness...
Learn More About The G-Force 6 Pt. Latch & Link Racing Harness Set w/ Individual Shoulders

List Price: $169.99
OurPrice: $154.99
(Selected options may carry additional charges)

The G-Force 6 Pt. Camlock Racing Harness Set uses soft weave Polyteck webbing. This Racing Harness set includes 3" individual shoulders, pull-down lap belt and dual-sub. The G-Force 6 Pt. Camlock Racing Harness set belts come standard with bolt-in ends and are both SFI 16.1 and FIA rated. Adjustment lengths - Shoulder: 26"-50"; Pull-Down Lap: 38"-67";Sub-strap: 7"-25". The G-Force 6 Pt. Camlock Racing Harness Set is available in Black, Red or Blue. ...
Learn More About The G-Force 6 Pt. Camlock Racing Harness Set w/ Individual Shoulders

OurPrice: $79.95
(Selected options may carry additional charges)

Porsche Sub-Belt Mount Bar allows proper mounting of the submarmine belt. This bar is designed for use only with fiberglasss shell style seats. The Porsche Sub-Belt Mount Bar was designed by Porsche for the GT3 Cup and GT3 R and RS model factory race cars. Works very well with the Recaro GT3 seat. This bar is not designed to work on any traditional Sport Seats.
...
Learn More About The Porsche Sub-Belt Mount Bar

Our Price: $27.00
Sale Price: $21.60
(Selected options may carry additional charges)

Sabelt 3" Harness Pads are made from fire retardant material and are designed to protect shoulders during performance driving. Sabelt 3" Harness Pads are available in Red or Black....
Learn More About The Sabelt 3" Harness Pads

Our Price: $319.95
Sale Price: $207.95
(Selected options may carry additional charges)

**SALE** SAVE 35%** FIA TAG DATE: 2013. GOOD UNTIL DEC. 31, 2013.
The Sabelt Racing Harness features the same ultralight camlock system that was used in the '03 World Championship Ferrari F1 car. This new buckle results in a reduction of 15% in overall belt weight. The Sabelt Racing Harness features 3" polyester webbing, lightweight adjusters, and the ultralight Sabelt buckle. Lap belts are pull-up adjustment with clip-in mounting hardware. Single (5pt.) sub-straps (FIA tag dated 2013) are sold...
Learn More About The Sabelt Racing Harness - Dated 2013

Our Price: $319.95
Sale Price: $239.95
(Selected options may carry additional charges)

**SALE** SAVE 25%** FIA TAG DATED 2014. GOOD UNTIL DEC.31, 2014.
The Sabelt Racing Harness features the same ultralight camlock system that was used in the '03 World Championship Ferrari F1 car. This new buckle results in a reduction of 15% in overall belt weight. The Sabelt Racing Harness features 3" polyester webbing for shoulder and lap belts, lightweight adjusters, and ultralight Sabelt buckle. Lap belts are available in pull-up or pull-down adjustment with bolt-in or clip-in mounting hardware. Single...
Learn More About The Sabelt Racing Harness Standard 3" Shoulder

OurPrice: $31.95
(Selected options may carry additional charges)

Sometimes people who wear harnesses for long periods of time complain of irritation of the skin on their shoulders and neck where the harnesses pass over. If that is the case, you need a set of these Schroth 2" Harness Pads to provide a soft cushion between the webbing and your skin. Other people use them as stylish comfort add-ons to their factory 3-Point restraints. Schroth 2" Harness Pads are made of high quality polyester. These pads can be...
Learn More About The Schroth 2" Harness Pads

OurPrice: $74.95
(Selected options may carry additional charges)

Schroth 3" Harness Pads - with Schroth Patch are NOMEX covered with sewn on Schroth Racing patch. Harness pads should NOT be used in conjunction with HANS Device. FIA/SFI....
Learn More About The Schroth 3" Harness Pads - with Schroth Patch

OurPrice: $24.95
(Selected options may carry additional charges)

Schroth BMW 3 series E-36 adapter allows installation of Schroth Rallye lap belt to seat. For use with bolt-in Rallye belts on in-board side only....
Learn More About The Schroth BMW 3 series E-36 Adapter

OurPrice: $529.00
(Selected options may carry additional charges)

The Schroth Enduro-Belt Racing Harness is SCHROTH's top-of-the-line Racing Harness range. For racers and teams looking for the best in seat belt technology! The newly designed adjuster technology "ZIP Adjuster" have been integrated into the lap belt buckle attachments to optimize the position of the adjusters for optimal adjustment. The design of the new "ZIP Adjusters" allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes. The same "Zip Adjuster"...
Learn More About The Schroth Enduro-Belt Racing Harness

OurPrice: $15.95
(Selected options may carry additional charges)

Schroth Harness Adjusting Grips help make tensioning of lap and shoulder straps quick and easy. Four per set, enhances all Schroth Rallye Harnessbelts....
Learn More About The Schroth Harness Adjusting Grips

OurPrice: $425.00
(Selected options may carry additional charges)

The Schroth Profi II - GT3 Racing Harnesses are standard in all Porsche GT3 Cup Cars direct from the factory. If you need to replace the Schroth Profi II - GT3 Racing Harnesses because of an accident, or if you're putting the factory GT3 seat setup into another car, you'll want these belts. They are specific because of the lap belt attachment. The Schroth Profi II - GT3 Racing Harnesses have a sewn-in bracket that fits perfectly on the...
Learn More About The Schroth Profi II - GT3 Racing Harness

OurPrice: $360.00
(Selected options may carry additional charges)

The Schroth Profi II 6-Point HANS Racing Harness is a HANS specific 6-point professional restraint system with 2"/3" shoulder belt combination. The Schroth Profi II 6-Point HANS Racing Harness also features the revolutionary Flexi-belt lap belt system. The Flexi-belt 2" lap belt easily converts from pull-up to pull-down or vice versa. The length of the lap belt can be adjusted, as well, to suit your needs. The lap belt is clip-in (bolt-in hardware sold separately). The camlock...
Learn More About The Schroth Profi II 6-Point HANS Racing Harness

OurPrice: $350.00
(Selected options may carry additional charges)

The Schroth Profi II 6-Point Racing Harness features the revolutionary Flexi-belt lap belt system. The Flexi-belt 2" lap belt easily converts from pull-up to pull-down or vice versa. The length of the lap belt can be adjusted, as well, to suit your needs. Lap belt is clip-in (bolt-in hardware sold separately). The camlock is an RFR rotary buckle which is fixed to the anti-sub strap. Dual substrap is clip-in. Shoulders are open ended with a...
Learn More About The Schroth Profi II 6-Point Racing Harness

OurPrice: $315.00
(Selected options may carry additional charges)

The Schroth Profi III 5-Point Racing Harness is the lightest and strongest Cam Lock system available today. The Schroth Profi III 5- Point Racing Harness features 3" polyester webbing, lightweight adjusters, and a RFR rotary buckle fixed to the anti-sub strap. Lap belts are available in pull-up or pull-down adjustment with bolt-in or clip-in mounting hardware. Single sub-strap is bolt-in or clip-in. Shoulders are 70" in length and are open ended with a 3-bar wrap adjuster; optional bolt-in or clip-in...
Learn More About The Schroth Profi III 5-Point Racing Harness

OurPrice: $340.00
(Selected options may carry additional charges)

The Schroth Profi III 6-Point HANS Racing Harness is a 6-point professional restraint system which features a 2"/3" shoulder belt combination and 3" lap belts; a RFR rotary buckle is fixed to the anti-sub strap. Lap belts are available in pull-up or pull-down adjustment with bolt-in or clip-in mounting hardware. Dual substrap is clip-in (bolt-in hardware sold separately). Racing Shoulders are 70" in length and are open ended with a 3-bar wrap adjuster; optional bolt-in or clip-in hardware for shoulders...
Learn More About The Schroth Profi III 6-Point HANS Racing Harness

OurPrice: $335.00
(Selected options may carry additional charges)

The Schroth Profi III 6-Point Racing Harness is the lightest and strongest Cam Lock system available today. The Schroth Profi III 6-Point Racing Harness features 3" polyester webbing, lightweight adjusters, and a RFR rotary buckle fixed to the anti-sub strap. Lap belts are available in pull-up or pull-down adjustment with bolt-in or clip-in mounting hardware. Dual substrap is clip-in (bolt-in hardware sold separately). Shoulders are 70" in length and are open ended with a 3-bar wrap adjuster; optional bolt-in or...
Learn More About The Schroth Profi III 6-Point Racing Harness

OurPrice: $235.00
(Selected options may carry additional charges)

Schroth's Quick Fit Harness with dual tail straps is designed to click into the factory seat belt receptacles. Where an additional attachment is needed, a small quick release connecter is installed to a readily accessible stock seat belt point in less than 10 minutes. The Schroth Quick Fit Street Legal Harness features the unique asm system (reduces the risk of submarining) and a quick release buckle that disconnects tail straps to allow easy access to rear seats. 2" wide. Not...
Learn More About The Schroth Quick Fit Street Legal Harness

OurPrice: $335.00
(Selected options may carry additional charges)

Schroth QuickFit Pro Street Legal Harness is the world's first 4-point harness that is designed to be used with a HANS Device in your stock seats! Now the safety and peace of mind that come from driving with a HANS device is available to the Driver's School and Open track day participant. The secret behind this revolutionary design is the integration with the vehicle's existing safety system and an innovative geometry maximizing effectiveness of the HANS Device. Conventional 4 point...
Learn More About The Schroth QuickFit Pro Street Legal Harness

OurPrice: $169.95
(Selected options may carry additional charges)

The Schroth Rallye 3 Street Legal Harness is the choice restraint for anyone who's car will not work with a Rallye 4. This would be the case if your rear seat was too close to the front seats for optimum geometry. In any harness, you absolutely do not want to have a tailstrap that angles down more than 45 degrees from a line parallel to the ground. Past this angle, the shoulder belts will not work the way they are...
Learn More About The Schroth Rallye 3 Street Legal Harness

OurPrice: $169.95
(Selected options may carry additional charges)

The Schroth Rallye 4 Street Legal Harness is the standard for anyone looking for a simple, clean, DOT-approved and Safe 4 point harness. The technology built into the harness puts it in a category above the belts made by other manufacturers. The years of testing and motorsport experience only give credit to what the engineers have been saying all along. There are two main reasons why the Schroth Belts are the only safe 4 point harnesses: ASM technology and the...
Learn More About The Schroth Rallye 4 Street Legal Harness

OurPrice: $19.00
(Selected options may carry additional charges)

Sparco 2" Harness Pads are protective cushions for shoulder belts with the Sparco Logo. Sold in Pairs....
Learn More About The Sparco 2" Harness Pads

OurPrice: $229.00
(Selected options may carry additional charges)

Sparco 2 in. 4-Point Harness with Cam-lock with bolt-in mounting hardware. Quick release camlock buckle system is the same as on the Competition harnesses. Includes yellow waist protection system.
...
Learn More About The Sparco 2in. 4-Point Harness with Cam-lock - Bolt-in

OurPrice: $25.00
(Selected options may carry additional charges)

Sparco 3" Harness Pads are protective cushions for the shoulder harness. The pads have Sparco logos. Sold in Pairs. Harness Pads are NOT to be used in conjunction with a HANS Device. ...
Learn More About The Sparco 3" Harness Pads

OurPrice: $29.00
(Selected options may carry additional charges)

Sparco Arm Restraints are SFI approved and are made of heavy duty webbing and D-rings which insures proper placement of these removable arm restraints. 360 degree padding guarantees a comfortable fit. Sold in pairs. Sparco Arm Restraints are available in Red, Blue and Black....
Learn More About The Sparco Arm Restraints

OurPrice: $129.00
(Selected options may carry additional charges)

Sparco Clubman Harness 3-Point harness with snap-in mounting hardware. Features double buckle release for easy access to rear seats. Includes yellow waist protection system.
the Sparco Clubman Harness - 3-Point, Snap-in, Double Release is available in red, blue, black or silver....
Learn More About The Sparco Clubman Harness - 3-Point, Snap-in, Double Release