Schroth Profi 2x2 Racing Harness
NEW FIA 8853-2016 homologated harness! Notes
The Schroth Profi 2x2 features 2” shoulder belts, 2" pull down profi lap belts with sewn snap in attachments, and a T-bar adjustable sub strap. Shoulders and sub strap hardware is wrapped in.
The full-length 2" shoulder webbing fits perfect on HANS and Schroth Flex FHR devices; creating optimal force distribution on the surface of the device.
The reason for 2" lap belt is the added safety. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in an accident because it gets loaded faster. It's also more comfortable and easier to adjust because there's less friction through the adjuster.
The Schroth Profi 2x2 comes with snap-in attachments at lap and sub points. The shoulders come ready to be wrapped around a roll-bar. Bolt in attachments can be purchased separately for shoulders and sub strap.
NOTE: Profi 2x2 only available with SNAP IN, PULL DOWN lap belts. Laps are not reversible like Flexi 2x2 belt.
Available in black and red.
FIA 8853-2016 homologated.
FIA 8853-2016 Technical Background:
Accident analysis of the many championships fitted with Accident Data Recorders has shown that very high G (>70g) crashes are now survivable with good vehicle crash-worthiness and cockpit environments together with best practices safety equipment. On this basis, the performance levels for FIA approved safety equipment have been newly defined to manage the forces and energies generated during the 70g accidents.
Additional changes and enhancements:
5pt harness systems and V-strap harness systems (sub-strap with single merge/point connection to buckle) will not be accepted or qualify for homologation under 8853-2016.
Use the form below to submit any question you may have about any of our products.