Brey - Krause Auto Racing Harnesses - Mounts - Restraints

OurPrice: $320.00

Brey-Krause R-1010 harness guide bar properly locates and supports the racing shoulder harnesses relative to the driver. The Brey-Krause R-1010 harness guide bar also prevents excessive shifting and driver fatigue during the high G-loads of cornering and braking. No drilling or modifications to the car are required for installation. The R-1010 harness guide bar attaches to factory mounting points in "B" pillars. Bar is designed to allow enough seat travel for tall drivers.
...
Learn More About The Brey-Krause R-1010 Harness Guide Bar - Porsche 911 (coupe) all 1974-1998

OurPrice: $420.00

The Brey-Krause R-1015 harness guide bar is made of Type 304, stainless steel with a satin finish. The Brey-Krause R-1015 harness guide bar attaches to factory mounting points in "B" pillars. The support rods attach to lap belt mounting points. Th R-1015 harness guide bar is designed to allow enough seat travel for tall drivers.
...
Learn More About The Brey-Krause R-1015 Harness Guide Bar - 911(Targa) '74 - '93

OurPrice: $425.00

Brey-Krause R-1020 harness guide bar properly locates and supports racing shoulder harnesses relative to the driver. The Brey-Krause R-1020 harness guide bar also prevents excessive shifting and driver fatigue during the high G-loads of cornering and braking. No drilling or modifications to the car are required for installation. Bar attaches to factory mounting points in "B" pillars and shoulder straps. The Bre-Krause R-1020 harness guide bar is designed to allow enough seat travel for tall drivers.
...
Learn More About The Brey-Krause R-1020 Harness Guide Bar - Porsche 924,944,968

OurPrice: $610.00

The Brey-Krause R-1025 harness truss has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. It's strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The Brey-Krause R-1025 harness truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type...
Learn More About The Brey-Krause R-1025 Harness Truss - Porsche 911 (coupe) 1974-1998

OurPrice: $670.00

The Brey-Krause R-1029 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Porshe 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The Brey-Krause R-1029 harness mount bars also prevent...
Learn More About The Brey-Krause R-1029 Harness Mount Bar - 996 Cabriolet & 997 Cabriolet/Coupe (with Bose Speakers)

OurPrice: $670.00

The Brey-Krause R-1030 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Porshe 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The Brey-Krause R-1030 harness mount bar also...
Learn More About The Brey-Krause R-1030 Harness Mount Bar - Porsche 996 & 997 Coupe (without Bose Speakers)

OurPrice: $180.00

The Brey-Krause R-1031 harness mount bar adaptor adapts the R-1030 and R-1035 harness mounts to fit in the 996 GT2 and GT3. It features new strut tubes that are designed to go to the forward lap belt mounts, as these cars lack rear seat belt mounting points. This kit replaces the forward support tubes included in original kit. Alternate bracket available for certain power seats upon request. The Brey-Krause R-1031 harness mount bar adaptor bolts to your...
Learn More About The Brey-Krause R-1031 Harness Mount Bar Adaptor - 996 GT2/GT3 & 997 GT2/GT3

OurPrice: $960.00

The Brey-Krause R-1035 aluminum harness mount truss features water-jet machined aluminum construction. Like all Brey-Krause harness mounts, the R-1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats. The Brey-Krause R-1035 aluminum harness mount truss attaches to rear strut tops & seat belt mounting points and is easy to remove/reinstall. NOTE-For the 996/997 GT2 & GT3, the...
Learn More About The Brey-Krause R-1035 Aluminum Harness Mount Truss - 996 & 997 Coupe (without Bose Speakers)

OurPrice: $700.00

Brey-Krause R-1045 Cayman harness truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The Brey-Krause R-1045 harness mount truss is made of aluminum and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 harness mount truss is easy to install and remove, utilizing existing factory mounting points. The lattice is...
Learn More About The Brey-Krause R-1045 Harness Mount Truss - Porsche Cayman Coupe '06-present

OurPrice: $610.00

The Brey-Krause R-1110 harness mount bars allow drivers to attach their harnesses directly to the bar. The Brey-Krause harness mount bar properly locates and supports racing shoulder harnesses relative to the driver and do not use or interfere with factory shoulder harness installation. Fabricated from type 304 stainless steel and is available in satin finish stainless. The Brey-Krause R-1110 harness mount bar attaches to factory mounting points in "B" pillars. Support rods attach to outside lap belt...
Learn More About The Brey-Krause R-1110 Harness Mount Bar for Corvette C4 (with outside belt mount kit)

OurPrice: $475.00

The Brey-Krause R-1115 harness mount bars allow drivers to attach their harnesses directly to the bar. The Brey-Krause R-1115 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver and do not use or interfere with factory shoulder harness installation. The R-1115 harness mount bar is fabricated from type 304 stainless steel and is available in a durable black wrinkle-finish, powdercoated finish.
(Lap belt mount kit sold seperately: R-9115)...
Learn More About The Brey-Krause R-1115 Harness Mount Bar for Corvette C5

OurPrice: $775.00

The Brey-Krause R-1120 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The Brey-Krause R-1120 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting...
Learn More About The Brey-Krause R-1120 Harness Mount Bar for C6 Corvette

OurPrice: $80.00

The Brey-Krause R-9001 Tunnel Side Seatbelt Mount Kit for Porsche 996, Boxster, 944 bolts to existing seatbelt mount amd provides a mounting point for snap-on 3" lap belts. Sold in pairs. Kit is for 2 seats. (For 1985-1989 Also Order R-9002 Kit ) ...
Learn More About The Brey-Krause R-9001 Tunnel Side Seatbelt Mount Kit for Porsche 996, Boxster, 944

OurPrice: $15.00

The Brey-Krause R-9002 Tunnel Side Seat Belt Hardware Kit is for use with Brey-Krause Part R-9001 in 1985-89 models ( Porsche 996, Boxster, 911, 944)...
Learn More About The Brey-Krause R-9002 Tunnel Side Seat Belt Hardware Kit

OurPrice: $80.00

The Brey-Krause R-9003 Outside Seat Belt Mount fits Porsche 996, Boxster, 911, 944 (For 1990 and newer models). Sold in pairs - One package will do 2 seats....
Learn More About The Brey-Krause R-9003 Outside Seat Belt Mount

OurPrice: $80.00

The Brey-Krause R-9004 Extra Short Tunnel Side Seat Belt Mount Kit fits Porsche 996, Boxster, 911 and 944.
These brackets were intended for seat applications where the standard Brey-Krause tunnel side lap belt mount (R-9001) is too long.
The Brey-Krause R-9004 Extra Short Tunnel Side Seat Belt Mount Kit secures snap-in lap belts to factory tunnel side (inside) seat belt mounting points.
Recommended for extra-low seating applications where the R-9001 sits excessively high.
One pair will work for both seats.
...
Learn More About The Brey-Krause R-9004 Extra Short Tunnel Side Seat Belt Mount Kit

OurPrice: $115.00

Brey Krause Sub-Belt Mount Bar fits Porsche 996/997, Boxster and Cayman.
The Brey Krause Sub-Belt Mount Bar for Porsche is 1.5" X 1" X .125" Wall Carbon Steel Tubing and is
Powdercoated in durable black wrinkle-finish.
The Brey Krause Sub-Belt Mount Bar for Porsche attaches to R-907X series side mounts.
This mount works with the R-907X series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional R-2030 Fire Extinguisher Mount and AMEREX 2 1/2...
Learn More About The Brey-Krause R-9030 Sub-Belt Mount Bar for Porsche

OurPrice: $115.00

The Brey-Krause R-9032 Sub Strap Mount Bar is made of stainless steel tubing and is powder coated in a durable black wrinkle-finish. The Brey-Krause R-9032 Sub Strap Mount Bar weighs in at 3 lbs. and attaches to driver side seat assembly using factory mounting points. This mount bar is used with Brey-Krause's R-2032 fire extinguisher mount. The Brey-Krause R-9032 Sub Strap Mount Bar fits Porsche 997/987 Optional Sport Bucket Seats (driver side) and GT2/GT3 seats (driver side)....
Learn More About The Brey-Krause R-9032 Sub Strap Mount Bar for Porsche 997/987 Sport Bucket Seats - Driver Side

OurPrice: $115.00

The Brey-Krause R-9034 Sub Strap Mount Bar is made of stainless steel tubing and is powder coated in a durable black wrinkle-finish. The Brey-Krause R-9034 Sub Strap Mount Bar weighs in at 3 lbs. and attaches to passenger side seat assembly using factory mounting points. The Brey-Krause R-9034 Sub Strap Mount Bar fits Porsche 997/987 Optional Sport Bucket Seats (passenger side) and GT2/GT3 seats (passenger side)....
Learn More About The Brey-Krause R-9034 Sub Strap Mount Bar for Porsche 997/987 Sport Bucket Seats - Passenger Side

OurPrice: $65.00

Brey-Krause R-9110 Inside Belt Mount Kit for Corvette C4 -sold in pairs. One pair required for 2 seats....
Learn More About The Brey-Krause R-9110 Inside Belt Mount Kit for Corvette C4

OurPrice: $160.00

Brey-Krause R-9115 Lap Belt Mount Kit for Corvette C5.
Installation: Secure snap-in belts to factory seat belt mounting points. One kit required per vehicle. One kit works for both passenger and driver seats in C5.
The Brey-Krause R-9115 Lap Belt Mount Kit for Corvette C5 will not disable use of factory seat belts.
Material: Type 304, stainless steel.
Finish: Satin finish stainless steel.
Weight: 4 lbs.

...
Learn More About The Brey-Krause R-9115 Lap Belt Mount Kit for Corvette C5

OurPrice: $145.00

The Brey-Krause R-9120 Lap Belt Mount Kit fits Corvette C6 models, '05+ C6 Coupes and '06+ Z06 Coupes.
One lap belt kit is required per vehicle. One lap kit works for both passenger and driver seats in C6. The Brey-Krause R-9120 lap belt mount kit will not disable use of factory belts. The lap belt mount kit secures snap-in belts to factory seat belt mounting points. The Brey-Krause R-9120 lap belt mount kit is made of Type 304 Stainless...
Learn More About The Brey-Krause R-9120 Lap Belt Mount Kit - Corvette C6

OurPrice: $50.00

The Brey-Krause R-9130 Sub Strap Mount Bar for Corvette C4 is fabricated from steel and is available in a durable black wrinkle-finish powdercoated finish. This Sub Strap Mount bar is the proper way to properly mount Sub Belts in your C4 Corvette....
Learn More About The Brey-Krause R-9130 Sub Strap Mount Bar for Corvette C4